HIP17 - 12th International conference on Hot Isostatic Pressing

from Tuesday, 5 December 2017 (08:30) to Friday, 8 December 2017 (19:10)


        : Sessions
    /     : Talks
        : Breaks
5 Dec 2017
6 Dec 2017
7 Dec 2017
8 Dec 2017
AM
11:00
ANSTO Tour -Dr Dorji Chavara (Australian Nuclear Science and Technology Organisation) Mr Gerry Triani (ANSTO) Mrs Kelly Cubbin (ANSTO) (until 16:00) ()
08:00
Nuclear (until 08:35) ()
08:00 ANM/SyMo Facility - Dr Adi Patterson (ANSTO)   ()
08:35
Nuclear (until 10:40) ()
08:35 Past and Present Applications of Synroc - Dr Eric Vance (ANSTO)   ()
Slides
09:00 Mechanical Strength Evaluation of Superconducting Magnet Structure by HIP Bonding Method - Mrs Kaoru Ueno (Metal Technology Co. Ltd.)   ()
Paper
Slides
09:25 Hot Isostatic Pressing of Radioactive Nuclear Waste: The Calcine at INL - Dr ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)   ()
Slides
09:50 Synthesis and microstructural characteristics of simulated iodine-bearing waste formed by HIP sintering of the silver impregnated alumina sorbent - Dr Tomofumi Sakuragi (Radioactive Waste Management Funding and Research Center)   ()
Slides
10:15 ANSTO’s Plutonium Wasteform Research   ()
Slides
10:40 --- Morning Tea ---
11:00
Materials (until 11:35) ()
11:00 HIP for AM - Optimized material properties by HIP - Dr ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)   ()
Slides
11:35
Materials (until 12:50) ()
11:35 The influence of post-HIP heat-treatments on the tensile and HCF properties of Ti6Al4V - Dr Miren Aristizabal (University of Birmingham)   ()
Slides
12:00 Surface Chemistry of Steel Powder and its Changes during HIP Processing - Prof. Eduard Hryha (Chalmers University of Technology)   ()
12:25 Oxygen content in PM HIP 625 and its effect on toughness - Mr Fredrik Meurling (Sandvik Materials Technology)   ()
Paper
Slides
08:00
HIP Process (until 08:35) ()
08:00 RECENT DEVELOPMENTS OF HIP EQUIPMENT IN JAPAN - Mr Katsumi WATANABE (KOBE Steel, Ltd.)   ()
Slides
08:35
HIP Process (until 11:05) ()
08:35 Controlled uniform load cooling in production scale HIP equipment - Mr Pierre Colman (Engineered Pressure Systems International NV) Mr Maxime Pauwels (Engineered Pressure Systems International NV)   ()
Slides
09:00 60 years after Battelle: why to HIP, what to HIP and how to HIP? (Science and Technology behind the Wall of an Autoclave) - Dr Victor Samarov (LNT PM Inc.)   ()
Slides
09:25 The Pros and Cons of HIPping of Ti-based Alloys to Near Net Shape - Prof. michael loretto (University of Birmingham UK)   ()
09:50 High Pressure Heat Treatment - Phase Transformation Under Isostatic Pressure in HIP - Mr Magnus Ahlfors (Quintus Technologies AB)   ()
Paper
Slides
10:15 TeraPi - A 3.5 meter diameter hot zone HIP unit enables HIP:ing of large components - Dr ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)   ()
Paper
Slides
10:40 Advances in HIP Equipment with the Tie-Rod and Quick Can Approaches - Mr Robert Conaway (1944)   ()
11:05 --- Morning Tea ---
11:30
Oil & Gas (until 12:05) ()
11:30 Effect of processing parameters on intermetallic phase content and impact toughness for super duplex alloy PM HIP Sandvik SAF 2507™ - Mr Martin Östlund (Sandvik Materials Technology)   ()
Paper
Slides
08:00
Materials (until 10:30) ()
08:00 Influence of rapid cooling rates for hot isostatic pressing on mechanical and corrosion properties of UNS S32205 - Mr Arnulf Hoertnagl (Institute for Materials System Technology Thurgau at the University of Applied Sciences Konstanz)   ()
Slides
08:25 Taylor-Made Net-Shape Composite Components by Combining Additive Manufacturing and Hot Isostatic Pressing - Mr Sebastian Riehm (RWTH Aachen University, Institute for Materials Applications in Mechanical Engineering, IWM)   ()
Slides
08:50 Production of Intermetallic Alloys by Powder Metallurgy: the Distinguishing Features of the Hot Isostatic Pressing - Dr Alexander Logachev (JSC"Kompozit")   ()
Slides
09:15 Toughness of duplex steel produced by PM-HIP - Prof. Christoph Broeckmann (IWM, RWTH Aachen University, Germany)   ()
Slides
09:40 The effect of HIP treatment on mechanical properties of titanium aluminide additively manufactured by EBM - Robert Joseph (Metal Technology Co. Ltd.)   ()
Slides
10:05 Experience in HIP Diffusion Welding of Dissimilar Metals and Alloys - Dr Victor Butrim (JSC"Kompozit" Deputy director general)   ()
Paper
Slides
10:30 --- Morning Tea ---
11:00
Aerospace (until 11:35) ()
11:00 Hot isostatic Pressing interest for Turbine parts in future Engines - Dr Benjamin PICQUE (AUBERT&DUVAL)   ()
Slides
11:35
Aerospace (until 12:25) ()
11:35 Net Shape HIP Process for the Parts of Rocket Engine Turbopump - Mr Rei Mihara (Space Technology Group, Research & Engineering Div., IHI Corporation)   ()
12:00 HIP Activities for Turbopump Components of Korea Space Launch Vehicle - Dr Suk-Hwan Yoon (Korea Aerospace Research Institute)   ()
PM
12:50 --- Lunch ---
14:00
Materials (until 15:40) ()
14:00 Effect of Hot Isostatic Pressing (HIP) on additively manufactured Ti6Al4V microlattice structures - Dr Dhriti Bhattacharyya (ANSTO, Lucas Heights, NSW 2234, Australia)   ()
14:25 Overview of properties, features and developments of PM HIP 316L and 316LN - Mr Martin Östlund (Sandvik Materials Technology)   ()
Paper
Slides
14:50 Post-HIPing of Transparent Polycrystalline Alumina Ceramics Prepared by Pulsed Electric Current Sintering - Prof. Makoto Nanko (Nagaoka University of Technology)   ()
Slides
15:15 Heat treatment inside the HIP-Unit - Mr Nils Wulbieter (Chair of Materials Technology, Ruhr-Universität Bochum, Germany)   ()
Paper
Slides
15:40 --- Afternoon Tea ---
16:00
Materials (until 17:40) ()
16:00 Capsule-free HIP of Water Atomised Steel Powder through CIP - Mr Maheswaran Vattur Sundaram (Chalmers University of Technology)   ()
16:25 Microstructural design of Ni-base superalloys by hot isostatic pressing - Mr Benjamin Ruttert (Ruhr-Universität Bochum)   ()
16:50 Precipitation of Y-Ti-O nanoparticles during the HIP consolidation of gas atomised powders - Dr Inigo Iturriza (Ceit_IK4)   ()
Slides
17:15 Development of constructive and technological solutions for the manufacture of blisks turbine by connecting the disk with shrouded blades under hot isostatic pressing - Prof. Liubov Magerramova (Alexandrovna)   ()
Slides
18:00
Poster Session (until 20:00) ()
18:00 Diffusion bonding of Al 6061and Cu by hot isostatic pressing - Mr qing teng (Huazhong University of Science and Technology)   ()
18:00 Fabrication of diamond/SiC composites using HIP from the mixtures of diamond and Si powders - Mr Motoyasu Aoki (Doshisha University)   ()
Paper
18:00 Heat Treatment of MIM parts by Hot Isostatic Pressing - Dr ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)   ()
Slides
18:00 Heat Treatment of PM parts by Hot Isostatic Pressing - Dr ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)   ()
Slides
18:00 HIP diffusion bonding of PM superalloy disk and cast superalloy blade rings for dual-alloy turbine wheels - Mr Yi-wen ZHANG (Central Iron and Steel Research Institute)   ()
18:00 Hot Isostatic Pressing (HIP) of Castings to Improve Quality and Material Properties - Dr ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)   ()
Slides
18:00 How to Avoid Coloring of Parts in Hot Isostatic Pressing - Dr ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)   ()
Slides
18:00 Large-scale and industrialized HIP equipment for the densification of additive manufactured parts - Prof. Hongxia Chen (CHINA IRON & STEEL RESEARCH INSTITUTE GROUP)   ()
12:05
Oil & Gas (until 12:55) ()
12:05 HIP process of a valve body to Near-Net-Shape using Grade 91 powder - Mr Toyohito Shiokawa (Metal Technology Co. Ltd.)   ()
Slides
12:30 Exhaust valve spindles for marine diesel engines manufactured by hot isostatic pressing - Dr Alberto Lapina (MAN Diesel & Turbo)   ()
Slides
12:55 --- Lunch ---
14:30
Materials (until 16:10) ()
14:30 Wear of PM HIP metal matrix composites – influence of carbide type - Mr Tomas Berglund (Sandvik Powder Solutions)   ()
Paper
Slides
14:55 HIP technology enable ceramic manufacturers to control material properties and increase productivity. - Dr ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)   ()
Slides
15:20 Novel approaches to densify powder metallurgical materials through hot isostatic pressing - Mr Maheswaran Vattur Sundaram (Chalmers University of Technology)   ()
Slides
15:45 Increasing the cost efficiency of hot isostatic pressing for near net-shape processing of titanium alloy components - Dr Hamish Fraser (The Ohio State University)   ()
16:10 --- Afternoon Tea ---
16:30
Materials (until 18:10) ()
16:30 Hot Isostatic Pressing of the Water Atomized Steel Powder Prealloyed with Chromium - Prof. Eduard Hryha (Chalmers University of Technology)   ()
16:55 Expanding HIP Applications as a Manufacturing Process by Overcoming the Long Existing Technical Barriers - Dr Hamish Fraser (The Ohio State University)   ()
17:20 HIP Processing of Improved Tooling Materials for High-Productivity Hot Metal Forming Processes - Dr Maxime Gauthier (National Research Council Canada)   ()
Slides
17:45 The effect of element Hafnium on the microstructure and mechanical properties of as-HIPed FGH4097 PM superalloy - Mr Jian Jia (Central Iron and Steel Research Institute) Prof. Yiwen Zhang (Central Iron and Steel Research Institute)   ()
19:00 --- Harbour Dinner Cruise ---
12:25 --- Lunch ---
14:00
Modelling (until 14:35) ()
14:00 Efficient modeling of very large NNS parts (up to 3 meter diameter) and key parameters to control dimensional scattering in a +- 15 mm range. - Dr Gerard RAISSON (Consultant)   ()
Slides
14:35
Modelling (until 15:50) ()
14:35 Prediction of the influence of non-homogeneous powder distribution on hot isostatically pressed components combining discrete element method and finite element analysis - Mr Alessandro Abena (University of Birmingham)   ()
Slides
15:00 Precise prediction of near net shape HIP components through DEM and FEM modelling - Mr Yuanbin Deng (RWTH Aachen University, Institute for Materials Applications in Mechanical Engineering, IWM)   ()
Slides
15:25 Tailoring HIP Equipment and Protocols for the Unique Features of MIM - Mr Robert Conaway (1944)   ()
Slides
15:50 --- Afternoon Tea ---
16:30
Awards (until 18:00) ()