Name: DENIM2017 - Design and Engineering of Neutron Instruments Meeting 2017
Start: 2017-11-28T14:00:00+11:00
End: 2017-12-01T23:30:00+11:00
Location: No location set

DENIM2017 - Design and Engineering of Neutron Instruments Meeting 2017

from Tuesday, 28 November 2017 (14:00) to Friday, 1 December 2017 (23:30)

: Sessions

: Talks

: Breaks

28 Nov 2017

29 Nov 2017

30 Nov 2017

1 Dec 2017

08:00	Registration (until 08:30) ()
08:30	Conference Introduction (until 08:45) ()
08:45	Welcome (until 09:00) ()
09:00	Plenary 1 (until 09:30) ()
09:00	How 50 years with HIFAR shaped the Australian Centre for Neutron Scattering - Dr Margaret Elcombe (ACNS) ()
09:30	Plenary 2 (until 10:10) ()
09:30	The next 50 years of neutron scattering – a brave attempt at extrapolating current trends way beyond their reasonable validity. - Prof. Ken Andersen (European Spallation Source) ()
10:10	--- Morning Tea ---
10:40	Session A (until 11:50) ()
10:50	Systems Engineering Analysis of the Science Productivity Program for Instrument Improvement Projects - Lacy Jones (ORNL Neutron Sciences Directorate) ()
11:10	Recent enhancements and performance gains from upgrades to ANSTO’s thermal neutron instrument TAIPAN and the triple-axis and Be-filter spectrometers - Dr Kirrily Rule (ANSTO) ()
11:30	Project execution by ZEA-1and lessons learned of implementing the project phases at HEiDi and other neutron scattering instruments - Dr Romuald Hanslik (Forschungszentrum Juelich GmbH) ()
11:50	Poster Slam (until 12:20) ()

08:30	Session D (until 10:10) ()
08:30	Air cushion: Pads and floors experiences - Mr Peter Keller (Paul Scherrer Institut) ()
08:50	Design of Factory Acceptance Testing of slit assemblies for Neutron Reflectometry - Dr Frank Darmann (ANSTO) ()
09:10	Design and Manufacturing Characteristics That Effect Accuracy and Repeatability of Worm and Wormwheel Rotation Stages - Mr Toby Oste (ACNS ANSTO) ()
09:30	Motion Control Future at the STFC ISIS Facility - Mr Stephen Cox (STFC ISIS) ()
09:50	ISIS Mechatronics challenges and success undertaken in the last year - Mr Nick Webb (ISIS) ()
10:10	--- Morning Tea ---
10:40	Breakout Sessions (until 12:30) ()

08:30	Breakout Discussion (until 09:00) ()
09:00	Session E (until 10:20) ()
09:00	Mechanical Design of ANDES: a multi-purpose neutron diffractometer for the RA10 - Mr Agustín Coleff (Mechanical division - Centro Atómico Bariloche -CNEA) ()
09:20	Spallation Neutron Source Second Target Station Conceptual Design - Mr Van Graves (Oak Ridge National Laboratory) ()
09:40	Fan chopper for chopper spectrometers at long pulse neutron sources - Mr Peter Harbott (Forschungszentrum Jülich GmbH - JCNS) ()
10:00	The status of CSNS neutron choppers development - Mr ping wang (Institute of high energy physics, Chinese academy of sciences) ()
10:20	--- Morning Tea ---
10:50	Plenary 3 (until 11:20) ()
10:50	Event Horizon, an exploration of the future of neutron scattering research facilities. - Mr iain sutton (ESS) ()
11:20	Session F (until 12:40) ()
11:20	Identifying and Resolving Shielding Issues - Mr Will Halcrow (STFC - ISIS) ()
11:40	In-Kind Instrument Projects – Gathering Experience by building an R&D guide-section. - Mr Sven Schuetz (PSI) ()
12:00	Redesign of Monochromator Shielding of Cold Neutron Triple-Axis Spectrometer at HANARO - Mrs Ji-Myung Ryu (Korea atomic energy research institute) ()
12:20	Manufacturability of Neutron Beam Monochromator Drum Shielding - Justin Jones (Merrick & Company) ()

14:00	Optional (until 17:00) ()
17:30	Welcome Drinks (until 19:00) ()
19:00	Optional (until 20:00) ()

12:20	--- Lunch ---
13:20	Session B (until 14:40) ()
13:20	Additive manufacturing of a wavelength shifting fibres (WLSF) based detector element: IMAT diffraction detector array. - Dr Francesco Zuddas (STFC - ISIS) ()
13:40	Challenge 1 m² neutron detector - Mr Joerg Burmester (Helmholtz-Zentrum Geesthacht) ()
14:00	Mechanical design of 10B based technology neutron detectors - Mr Isaac Lopez Higuera (European Spallation Source ERIC) ()
14:20	Detector bank upgrade of the Necsa neutron powder diffractometer - Dr Deon Marais (The South African Nuclear Energy Corporation (Necsa) SOC Limited) ()
14:40	--- Afternoon Tea ---
15:10	Session C (until 16:30) ()
15:10	“Bilby” collimator vessel, design considerations & solutions. - Mr Jason Christoforidis (ANSTO) ()
15:30	Additive Manufacturing Of Collimators From Neutron Absorbing Material - David Anderson (Oak Ridge National Laboratory) ()
15:50	Current State of Japanese Engineering Diffractometer, RESA-1 - Dr Hiroshi Suzuki (Japan Atomic Energy Agency) ()
16:10	Beam-stop Changer Device - Mr Sylvain Desert (LLB) ()
16:30	Nibblies - Poster, Sponsors DENIM Challenge (until 19:06) ()
16:30	The Upgrade of the Neutron Spin-Echo Spectrometer at the FRM-II (Poster) - Mr Tadeusz Kozielewski (Jülich Centre for Neutron Science, Forschungszentrum Jülich GmbH, Jülich, Germany) ()
16:36	Commissioning of a shearing machine for soft matter samples - Mr Guido Vehres (Forschungszentrum Jülich GmbH) ()
16:42	Maintaining and calibrating your equipment - what methodolgies and systems exist? - Mr Scott Olsen (ANSTO) ()
16:48	Mechanical testing of the RAMPA Type B Inserts when used in Pb99.94cU Lead shielding - Mr Stewart Pullen (ANSTO) ()
17:04	Safety Interlock System and User Interfaces - Mr David Federici (Electrical controls Technician) ()
17:10	OPAL - Thermal Neutron Guides TNG1 adn TNG3 Replacement - Kristian Veronika (ANSTO) ()
17:16	Update of the transfer of the BioRef (SPATZ) Reflectometer from HZB to ANSTO - Mr Stewart Pullen (ANSTO) ()
17:22	Variable collimation snout for Quokka (Small angle instrument) - Mr Merv Perry (ANSTO) ()
17:28	Design Stage Divergent Neutron Beams - Mr Matt Bell (ANSTO) ()
17:34	The Powersupply system of the Neutron Spin-Echo Spectrometer at the FRM-II - Mr Guido Vehres (Forschungszentrum Jülich GmbH) ()
17:40	Neutron Chopper Vibration Analysis - Mr Sebastian Williams (ANSTO) ()
17:46	Progress Status of New T0 Chopper System at J-PARC MLF - Mr Wataru Kambara (J-PARC) ()
17:52	Upgrade of the Necsa neutron radiography instrument - Dr Deon Marais (The South African Nuclear Energy Corporation (Necsa) SOC Limited) ()
17:58	ANSTO OPAL Reactor CNS Replacement - Mr Andrew Eltobaji (ANSTO) ()
18:04	Leveraging existing IT condition monitoring systems to keep track of the health of networked industrial devices and their processes. - Mr Daniel Bartlett (ANSTO) ()
18:10	Sample Environment Equipment for use on Neutron Instruments - Stan Lee (Australian Nuclear Science Technology Organisation) ()
18:16	Development of an argon box for stable beam collimation on MARIA instrument at the JCNS - Mr Kendal Bingöl (JCNS / Forschungszentrum Jülich) ()
18:22	ESS Instrument Controls - Mr David Brodrick (European Spallation Source ERIC) ()
18:28	HOW TO SETUP A COMPLEX SAMPLE BY LASERS - Mr Tai Nguyen (Ansto) Mr Mark New (Asnto) ()
18:34	Development of accelerator-driven compact neutron source for non-destructive inspection of infrastructure constructs. - Dr Tomohiro Kobayashi (RIKEN) ()
18:40	Target development of the accelerator driven High Brilliance neutron Source (HBS) - Mr Paul-Emmanuel Doege (JCNS-2, Forschungszentrum Jülich GmbH, D-52425 Jülich, Germany) ()
18:46	Readout of the MWPC detector at the neutron reflectometer MARIA based on TANGO and the GPX TDC ASIC - Mr Harald Kleines (Forschungszentrum Juelich) ()

12:30	Travel (until 13:30) ()
13:30	--- Lunch ---
14:30	ANSTO Tour (until 16:30) ()
16:30	Travel (until 17:30) ()

12:40	--- Lunch ---
13:40	Session G (until 14:40) ()
13:40	Present Status of University-owned Neutron Beam Instruments at JRR-3 - Dr Daichi Kawana (Neutron Science Laboratory, Institute for Solid State Physics, the University of Tokyo) ()
14:00	Status of Neutron Scattering Facilities at HANARO - Dr BAEK SEOK Seong (KAERI) ()
14:20	Remote handling implementation at ESS - Mr Erik Nilsson (European spallation source ESS ERIC) ()
14:40	Wrap Up (until 15:00) ()
15:00	Travel (until 15:30) ()
15:30	Opera House Tour (until 17:00) ()
17:00	Free Time (until 18:30) ()
18:30	--- Conference Dinner ---

Your browser is out of date!