Name: HIP17 - 12th International conference on Hot Isostatic Pressing
Start: 2017-12-05T08:30:00+11:00
End: 2017-12-08T19:10:00+11:00
Location: No location set

Monday, 4 December 2017
Tuesday, 5 December 2017

11:00

11:00 - 16:00
Wednesday, 6 December 2017
08:00 Keynote
Keynote
08:00 - 08:35
Contributions

08:00 ANM/SyMo Facility - Adi Patterson (ANSTO)
08:35 Session 1
Session 1
08:35 - 10:40
Contributions

08:35 Past and Present Applications of Synroc - Eric Vance (ANSTO)

09:00 Mechanical Strength Evaluation of Superconducting Magnet Structure by HIP Bonding Method - Kaoru Ueno (Metal Technology Co. Ltd.)

09:25 Hot Isostatic Pressing of Radioactive Nuclear Waste: The Calcine at INL - ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)

09:50 Synthesis and microstructural characteristics of simulated iodine-bearing waste formed by HIP sintering of the silver impregnated alumina sorbent - Tomofumi Sakuragi (Radioactive Waste Management Funding and Research Center)

10:15 ANSTO’s Plutonium Wasteform Research
10:40 Morning Tea
Morning Tea
10:40 - 11:00
11:00 Keynote
Keynote
11:00 - 11:35
Contributions

11:00 HIP for AM - Optimized material properties by HIP - ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)
11:35 Session 2
Session 2
11:35 - 12:50
Contributions

11:35 The influence of post-HIP heat-treatments on the tensile and HCF properties of Ti6Al4V - Miren Aristizabal (University of Birmingham)

12:00 Surface Chemistry of Steel Powder and its Changes during HIP Processing - Eduard Hryha (Chalmers University of Technology)

12:25 Oxygen content in PM HIP 625 and its effect on toughness - Fredrik Meurling (Sandvik Materials Technology)
12:50 Lunch
Lunch
12:50 - 14:00
14:00 Session 3
Session 3
14:00 - 15:40
Contributions

14:00 Effect of Hot Isostatic Pressing (HIP) on additively manufactured Ti6Al4V microlattice structures - Dhriti Bhattacharyya (ANSTO, Lucas Heights, NSW 2234, Australia)

14:25 Overview of properties, features and developments of PM HIP 316L and 316LN - Martin Östlund (Sandvik Materials Technology)

14:50 Post-HIPing of Transparent Polycrystalline Alumina Ceramics Prepared by Pulsed Electric Current Sintering - Makoto Nanko (Nagaoka University of Technology)

15:15 Heat treatment inside the HIP-Unit - Nils Wulbieter (Chair of Materials Technology, Ruhr-Universität Bochum, Germany)
15:40 Afternoon Tea
Afternoon Tea
15:40 - 16:00
16:00 Session 4
Session 4
16:00 - 17:40
Contributions

16:00 Capsule-free HIP of Water Atomised Steel Powder through CIP - Maheswaran Vattur Sundaram (Chalmers University of Technology)

16:25 Microstructural design of Ni-base superalloys by hot isostatic pressing - Benjamin Ruttert (Ruhr-Universität Bochum)

16:50 Precipitation of Y-Ti-O nanoparticles during the HIP consolidation of gas atomised powders - Inigo Iturriza (Ceit_IK4)

17:15 Development of constructive and technological solutions for the manufacture of blisks turbine by connecting the disk with shrouded blades under hot isostatic pressing - Liubov Magerramova (Alexandrovna)
18:00
18:00 - 20:00
Contributions

18:00 Diffusion bonding of Al 6061and Cu by hot isostatic pressing - qing teng (Huazhong University of Science and Technology)

18:00 Large-scale and industrialized HIP equipment for the densification of additive manufactured parts - Hongxia Chen (CHINA IRON & STEEL RESEARCH INSTITUTE GROUP)

18:00 HIP diffusion bonding of PM superalloy disk and cast superalloy blade rings for dual-alloy turbine wheels - Yi-wen ZHANG (Central Iron and Steel Research Institute)

18:00 Hot Isostatic Pressing (HIP) of Castings to Improve Quality and Material Properties - ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)

18:00 Heat Treatment of PM parts by Hot Isostatic Pressing - ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)

18:00 Heat Treatment of MIM parts by Hot Isostatic Pressing - ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)

18:00 How to Avoid Coloring of Parts in Hot Isostatic Pressing - ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)

18:00 Fabrication of diamond/SiC composites using HIP from the mixtures of diamond and Si powders - Motoyasu Aoki (Doshisha University)
Thursday, 7 December 2017
08:00 Keynote
Keynote
08:00 - 08:35
Contributions

08:00 RECENT DEVELOPMENTS OF HIP EQUIPMENT IN JAPAN - Katsumi WATANABE (KOBE Steel, Ltd.)
08:35 Session 5
Session 5
08:35 - 11:05
Contributions

08:35 Controlled uniform load cooling in production scale HIP equipment - Maxime Pauwels (Engineered Pressure Systems International NV) Pierre Colman (Engineered Pressure Systems International NV)

09:00 60 years after Battelle: why to HIP, what to HIP and how to HIP? (Science and Technology behind the Wall of an Autoclave) - Victor Samarov (LNT PM Inc.)

09:25 The Pros and Cons of HIPping of Ti-based Alloys to Near Net Shape - michael loretto (University of Birmingham UK)

09:50 High Pressure Heat Treatment - Phase Transformation Under Isostatic Pressure in HIP - Magnus Ahlfors (Quintus Technologies AB)

10:15 TeraPi - A 3.5 meter diameter hot zone HIP unit enables HIP:ing of large components - ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)

10:40 Advances in HIP Equipment with the Tie-Rod and Quick Can Approaches - Robert Conaway (1944)
11:05 Morning Tea
Morning Tea
11:05 - 11:30
11:30 Keynote
Keynote
11:30 - 12:05
Contributions

11:30 Effect of processing parameters on intermetallic phase content and impact toughness for super duplex alloy PM HIP Sandvik SAF 2507™ - Martin Östlund (Sandvik Materials Technology)
12:05 Session 6
Session 6
12:05 - 12:55
Contributions

12:05 HIP process of a valve body to Near-Net-Shape using Grade 91 powder - Toyohito Shiokawa (Metal Technology Co. Ltd.)

12:30 Exhaust valve spindles for marine diesel engines manufactured by hot isostatic pressing - Alberto Lapina (MAN Diesel & Turbo)
12:55 Lunch
Lunch
12:55 - 14:30
14:30 Session 7
Session 7
14:30 - 16:10
Contributions

14:30 Wear of PM HIP metal matrix composites – influence of carbide type - Tomas Berglund (Sandvik Powder Solutions)

14:55 HIP technology enable ceramic manufacturers to control material properties and increase productivity. - ANDERS EKLUND (QUINTUS TECHNOLOGIES AB)

15:20 Novel approaches to densify powder metallurgical materials through hot isostatic pressing - Maheswaran Vattur Sundaram (Chalmers University of Technology)

15:45 Increasing the cost efficiency of hot isostatic pressing for near net-shape processing of titanium alloy components - Hamish Fraser (The Ohio State University)
16:10 Afternoon Tea
Afternoon Tea
16:10 - 16:30
16:30 Session 8
Session 8
16:30 - 18:10
Contributions

16:30 Hot Isostatic Pressing of the Water Atomized Steel Powder Prealloyed with Chromium - Eduard Hryha (Chalmers University of Technology)

16:55 Expanding HIP Applications as a Manufacturing Process by Overcoming the Long Existing Technical Barriers - Hamish Fraser (The Ohio State University)

17:20 HIP Processing of Improved Tooling Materials for High-Productivity Hot Metal Forming Processes - Maxime Gauthier (National Research Council Canada)

17:45 The effect of element Hafnium on the microstructure and mechanical properties of as-HIPed FGH4097 PM superalloy - Jian Jia (Central Iron and Steel Research Institute) Yiwen Zhang (Central Iron and Steel Research Institute)
19:00 Harbour Dinner Cruise
Harbour Dinner Cruise
19:00 - 22:00
Friday, 8 December 2017
08:00 Session 9
Session 9
08:00 - 10:30
Contributions

08:00 Influence of rapid cooling rates for hot isostatic pressing on mechanical and corrosion properties of UNS S32205 - Arnulf Hoertnagl (Institute for Materials System Technology Thurgau at the University of Applied Sciences Konstanz)

08:25 Taylor-Made Net-Shape Composite Components by Combining Additive Manufacturing and Hot Isostatic Pressing - Sebastian Riehm (RWTH Aachen University, Institute for Materials Applications in Mechanical Engineering, IWM)

08:50 Production of Intermetallic Alloys by Powder Metallurgy: the Distinguishing Features of the Hot Isostatic Pressing - Alexander Logachev (JSC"Kompozit")

09:15 Toughness of duplex steel produced by PM-HIP - Christoph Broeckmann (IWM, RWTH Aachen University, Germany)

09:40 The effect of HIP treatment on mechanical properties of titanium aluminide additively manufactured by EBM - Robert Joseph (Metal Technology Co. Ltd.)

10:05 Experience in HIP Diffusion Welding of Dissimilar Metals and Alloys - Victor Butrim (JSC"Kompozit" Deputy director general)
10:30 Morning Tea
Morning Tea
10:30 - 11:00
11:00 Keynote
Keynote
11:00 - 11:35
Contributions

11:00 Hot isostatic Pressing interest for Turbine parts in future Engines - Benjamin PICQUE (AUBERT&DUVAL)
11:35 Session 10
Session 10
11:35 - 12:25
Contributions

11:35 Net Shape HIP Process for the Parts of Rocket Engine Turbopump - Rei Mihara (Space Technology Group, Research & Engineering Div., IHI Corporation)

12:00 HIP Activities for Turbopump Components of Korea Space Launch Vehicle - Suk-Hwan Yoon (Korea Aerospace Research Institute)
12:25 Lunch
Lunch
12:25 - 14:00
14:00 Keynote
Keynote
14:00 - 14:35
Contributions

14:00 Efficient modeling of very large NNS parts (up to 3 meter diameter) and key parameters to control dimensional scattering in a +- 15 mm range. - Gerard RAISSON (Consultant)
14:35 Session 11
Session 11
14:35 - 15:50
Contributions

14:35 Prediction of the influence of non-homogeneous powder distribution on hot isostatically pressed components combining discrete element method and finite element analysis - Alessandro Abena (University of Birmingham)

15:00 Precise prediction of near net shape HIP components through DEM and FEM modelling - Yuanbin Deng (RWTH Aachen University, Institute for Materials Applications in Mechanical Engineering, IWM)

15:25 Tailoring HIP Equipment and Protocols for the Unique Features of MIM - Robert Conaway (1944)
15:50 Afternoon Tea
Afternoon Tea
15:50 - 16:30

16:30

16:30 - 18:00